Industrial Finishing Specialists - Approved Applicator For The Akzo Nobel Interpon PZ770 System

TAKING THE GUESSWORK OUT OF POWDER COATING 

Home Page About Us Mission Statement Contact Us

AKZO NOBEL APPROVED APPLICATOR FOR THE INTERPON PZ 770 SYSTEM - ANTI CORROSIVE POWDERS - MARINE ENVIRONMENT POWDERS ISO 12944 C5-M - ANTI BACTERIAL POWDERS - ARCHITECTURAL POWDERS - INDUSTRIAL POWDERS - RAL COLOURS - BS 381C COLOURS - SPECIAL COLOURS

 

 
Choosing A Powder
Recognised Standards
Equipment
Photo Albums
Powder Testing
A Production Sequence

When Powder Goes Wrong                        
Laser Oxide Removal
Colour Charts
PZ770 v Hot Dip Galvanising
Special Finish Powders
Nylon Coating
Data Sheets
Useful Links

Humidity and Dew Point

Blast cleaning can only be carried out on a dry surface with a clean abrasive free from impurities and using dry air free from traces of grease or oil when :

-    The relative atmospheric humidity  exceeds 85%

-    The temperature of the object is less than 3 Deg C above the dew point

-    Outside of these parameters blast cleaning should not be continued

Back To Powder Testing

  

 

 All pages Copyright ©  2009 by  Alan Cleghorn. Copyright of all documents and scripts belonging to this site by Alan Cleghorn  2009. Most of the information contained on this site is copyrighted material. It is illegal to copy or redistribute this information in any way without the expressed written consent of the author.